After you added your fixtures you can set some options:
React to sound:
Check this option "Let fixture react to sound when enabled" if you want that the fixture's gobo, color,pan & tilt channels are updated by the "Sound & light" module.
Change startaddress:
Click in the first column (list on the right) if you want to change the startingaddress of the selected fixture. Change it and press "Enter"key.
Change display name:
Click on a name of a fixture (list on the right) and start editing the name of the fixture.
Reset all fixture settings:
If you want to reset all settings of the fixtures (positioning, inversed channels...) click on the "Reset fixt. Data" button.
When you rightclick on a fixture on the main form or you click on the "Fixture" menuitem (enabled when atleast one fixture selected) you get following popupmenu:
Inverse pan/tilt:
Inverse Pan/Tilt will inverse these channels in real-time which can give you instant changes in your lightshow. Every channel can be inversed: open the output window, right click on the desired channel and click "inverse".
Swap pan/tilt:
Pan becomes tilt and tilt becoms pan.
Release override settings
Click here to release overridevalues of the selected fixture(s)
Use in DMX400
If you want the fixture to be controlled with the DMX400 chaser then you must configure it's channel here (only for RGB and dimmerpacks)
Do not use in DMX400
Remove the fixture from the DMX400 chaser
Reset fixture:
Reset fixture will send a reset value (if configured in the fixture's profile) for 6 seconds.
Move to zone x:
If you enabled the zones, 4 new menu items will appear.
When you want to move one or more fixtures to another zone, select them, right click and select "move to mainroom", "move to bar" or other.